1-7/8 in. Barbed-Wire / Single Arm
The arm can be used in commercial settings or for smaller, residential applications.
Product is for the installation on chain-link fencing to hold barbed wire
Related products
Post cap 2-3/8
Patented Chain Link Post Caps help swaged pipe and cap fit together. They also give chain link fencing a finished look. The chain link fence post cap is made from aluminum and is designed to resist weathering and rust, and increase the longevity of the metal fence fittings for outdoor use. This chain link fence hardware will fit on top of a 2-3/8 in. diameter corner or end posts.
8 ft. Galvanized Chain Link Tension Bar
These steel tension bars are used to secure the chain link fabric to the terminal (end) post, corner posts and gate posts. These chain link fittings are designed to distribute pressure evenly throughout the fabric, minimizing bending and damage to the fence fabric. This coating makes the fittings perfect for outdoor and long-term use.
2-3/8 in. to 1-5/8 in Galvanized Chain Link Walk Gate Hardware Set Hing Set
The chain link gate hardware kit allows the gate to swing open and closed for smooth operation. Included are: metal post hinges, metal gate frame hinges, metal fork latch, and metal carriage bolts/nuts. The female gate hinges fit around gate frames that are 1-5/8 in. diameter. The male post hinges fit around terminal (end/corner) fence posts that are 2-3/8 in. diameter. The Y-shaped fork latch will keep your fence gate securely closed. Hing allow the gate to swing open and closed.
1-3/8 in. Aluminum Rail End
Black Chain Link Fence Top Rail End Cap will fit at the ends of a 1-3/8 in. aluminum top rail to connect top rails to corner posts (end/terminal posts) with brace brands and carriage bolts (sold separately). The fitting is offset so that it can be positioned either up or down, allowing the rail to be level in all directions from the metal chain link fence posts
6 ft. Galvanized Chain Link Tension Bar
These steel tension bars are used to secure the chain link fabric to the terminal (end) post, corner posts and gate posts. These chain link fittings are designed to distribute pressure evenly throughout the fabric, minimizing bending and damage to the fence fabric. This coating makes the fittings perfect for outdoor and long-term use.