Post cap 2-3/8
Patented Chain Link Post Caps help swaged pipe and cap fit together. They also give chain link fencing a finished look. The chain link fence post cap is made from aluminum and is designed to resist weathering and rust, and increase the longevity of the metal fence fittings for outdoor use. This chain link fence hardware will fit on top of a 2-3/8 in. diameter corner or end posts.
Category: Accessories
Tag: Post cap 2-3/8
Related products
1-7/8 in. Galvanized Brace Band
Post cap 1-7/8
Patented Chain Link Post Caps help swaged pipe and cap fit together. They also give chain link fencing a finished look. The chain link fence post cap is made from aluminum and is designed to resist weathering and rust, and increase the longevity of the metal fence fittings for outdoor use. This chain link fence hardware will fit on top of a 1-7/8 in. diameter corner or middle posts.
Aluminum Wire Ties
Gauge Galvanized Metal Chain Link Hog Rings
Galvanized Steel Chain Link Hog Rings for fencing are the right choice for securing chain link fabric to tension wires. The rings are easy to install - just loop the open ring around the fabric and tension wire, then squeeze shut. The rings can be removed, if needed. The hog rings are made from galvanized steel to help resist weathering and rust and increase longevity. This coating makes the fittings perfect for outdoor and long-term use. There are many different types of hog rings, for a variety of uses. These C-Type rings are the best for chain link fence installation. The rings can also be used for installing wire fences, wire mesh and chicken wire mesh.
2-3/8 in. to 1-5/8 in Galvanized Chain Link Walk Gate Hardware Set Hing Set
The chain link gate hardware kit allows the gate to swing open and closed for smooth operation. Included are: metal post hinges, metal gate frame hinges, metal fork latch, and metal carriage bolts/nuts. The female gate hinges fit around gate frames that are 1-5/8 in. diameter. The male post hinges fit around terminal (end/corner) fence posts that are 2-3/8 in. diameter. The Y-shaped fork latch will keep your fence gate securely closed. Hing allow the gate to swing open and closed.
1-7/8 in. Barbed-Wire / Single Arm
8 ft. Galvanized Chain Link Tension Bar
These steel tension bars are used to secure the chain link fabric to the terminal (end) post, corner posts and gate posts. These chain link fittings are designed to distribute pressure evenly throughout the fabric, minimizing bending and damage to the fence fabric. This coating makes the fittings perfect for outdoor and long-term use.
1-3/8 in. Aluminum Rail End
Black Chain Link Fence Top Rail End Cap will fit at the ends of a 1-3/8 in. aluminum top rail to connect top rails to corner posts (end/terminal posts) with brace brands and carriage bolts (sold separately). The fitting is offset so that it can be positioned either up or down, allowing the rail to be level in all directions from the metal chain link fence posts